| | | | |  | | · 단상에서 3상4선까지 지원
· 표시범위 1000V, 최대측정전압 780V
· 동시에 3상 2선식회로 측정가능(동일 전원 계통)
· 누설 전류의 측정가능(50mA의 옵션 클램프 사용)
· SD카드에 수개월의 데이타 저장가능
· QUICK SET 기능으로 쉽고 정확한 연결지원
· PW3360-21(고조파기능 추가) |
| |  | | Measurement line & number of circuits | Single-phase 2-wire (1P2W, 1P2W x 2 circuits, 1P2W x 3 circuits)
Single-phase 3-wire (1P3W, 1P3W+I, 1P3W1U, 1P3W1U+I)
Three-phase 3-wire (3P3W2M, 3P3W2M+I, 3P3W3M)
Three-phase 4-wire (3P4W), Current only: 1 to 3 channels, 50/60 Hz | Measurement items | Voltage/current RMS, voltage/current fundamental wave value, voltage /current fundamental wave phase angle, frequency, voltage/current waveform peak (absolute value), active/reactive/ apparent power, power factor (with lag/lead display) or displacement power factor (with lag/ lead display), active energy (consumption, regeneration), reactive energy (consumption, regeneration), electricity rate display (by means of planned future function update), active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input | Voltage ranges | 600 V AC (single range) | Current ranges | 500.00 mA to 5.0000 kA AC (depends on current sensor in use),
50.000 mA to 5.0000 A AC (LEAK CLAMP ON SENSOR only) | Power ranges | 300.00 W to 9.0000 MW
(Depends on voltage/current combination and measured line type) | Basic accuracy | AC Voltage : ±0.3% rdg. ±0.1% f.s
AC Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy
Active power : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (at power factor = 1)
Clamp-On Sensor 9661 accuracy: ±0.3% rdg. ±0.01% f.s. (Accuracy depends on clamp sensor) | Display update rate | 0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication) | Save destination | SD Card, internal memory (capacity: approx. 320 KB) | Data save interval | 1 sec to 30 sec, 1 minute to 60 minutes, 14 selections | Save items | Measurement save: Average only / all (average, maximum, minimum)
Screen copy: The minimum interval time for saving screen copies is 5 min. | Interfaces | [LAN] 10BASE-T/100BASE-TX IEEE802.3 Compliance
[USB] USB Ver 2.0, Windows 7 (32/64bit) /Vista (32bit) /XP | Functions | Quick Set, Backup, Key Lock, Pulse Input, Pulse Output | Power supply | AC ADAPTER Z1006: (12 V, 1.25 A), Rated supply voltage 100 VAC to 240 VAC, Rated power supply frequency 50/60 Hz
BATTERY PACK 9459: (Ni-MH DC7.2 V 2700 mAh) | Dimensions, mass | 180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002
180 mm (7.09 in) W × 100 mm (3.94 in) H × 68 mm (2.68 in) D, 830 g (29.3 oz) with PW9002 | Accessories | VOLTAGE CORD L9438-53 ×1 set, AC ADAPTER Z1006 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color spiral tubes ×1 set: red, yellow, blue/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords ×5 |
|
|
| |  | | |
| | |
|
